I have had this Macross Zentraedi command ship model since 1986 or so. I bought it at the Orange County Swap meet for $10 when I was 15 years old! (I'm 49 now). For some reason I held on to it. It was always in my spare parts box along with the little Macross SDF-1 that came with it but they were both in really bad shape. The main antenna was gone as well as one of the smaller ones from the front of the ship.
The SDF-1 was missing both ships and two of the shoulder cannons. The base that came with the kit was long gone. I had actually tried to clean this up about 7 years ago but I didn't know what I was doing back then. I felt that I could really do this kit the right way with a little effort now.
First thing was to decide was color scheme. Rather than go with dark colors that would exist in real life I went with the color scheme from the cartoon. Primary colors. bright green, blue, and yellow. Tamiya Park Green was perfect.
I used some Tamiya Dark Green for the shading.
Then went over the whole thing again with Park Green to tone it down.
For the blue, Tamiya Sky Blue hit the mark.
Taniya Flat Blue for shading.
The model had gaping holes where the bits and bobs on the outside were removed and re-glued countless times over the last 30 years. I covered the holes with thin styrene. I added some mesh for texture in the large open areas.
Then I painted it all flat black.

I painted the (I don't know what they are. Yellow thingies?) Flat yellow with some Tamiya Clear Orange shading.
Then I had to fabricate a new main antenna. I didn't bother to look and see what it should really look like. I just made something that I liked from my vague memory of this part. I glued together two pieces of styrene sheet, then Shaped it with sand paper.
Good enough for me!
This little SDF-1 was beat up. It actually fell apart in my hands while trying to get the ancient enamel paint off of it. I almost scrapped it but decided to give it a go anyway and I'm glad I did.
I made a bridge and conning tower for the top and made some new guns.
I also made some thruster grills for the back where the model was just flat.
I have never ever tired to mask something this small before.
While I was doing it I kept asking myself if it was worth the effort.
It was worth the effort! I also added the corners to the ends of the thrusters. That was fun cutting little tiny pieces of thin styrene and then folding them to fit each corner.
Gloss coat and Panel wash.
When I put the matte coat on this (Tamiya TS-80) everything just popped! It all came together rather nicely after all. I am really, really happy with the results.